The laser level price in Pakistan at Punjab Tools runs from Rs 1,350 for a basic red-beam 4-in-1 tool to Rs 13,000 for the Sared 5-line self-leveling green laser and Rs 15,000 for the Sared 16-line 4D green laser. For tiling or false ceilings across a whole room, the 16-line is worth the extra Rs 2,000. For one wall at a time, the 5-line is enough, and the Rs 1,350 tool only suits small jobs like shelves and frames.
All prices below are Punjab Tools prices, October 2026 — check the product page for today's price.
Laser level price in Pakistan: October 2026 list
| Model | Beam | Lines | Self-leveling | Price |
|---|---|---|---|---|
| 4-in-1 Multipurpose Laser Level pro 3 | Red | Horizontal, vertical or cross | No, you level it with bubble vials | Rs 1,350 |
| Sared SR-LL-0501 | Green | 5 lines (4 vertical, 1 horizontal) | Yes, within ±3° | Rs 13,000 |
| Sared SR-LL-1601 | Green | 16-line 4D (two 360° horizontal, two 360° vertical) | Yes, within ±3° | Rs 15,000 |
Two measuring tools often bought alongside a laser are the DINGQI 40M laser distance meter (Rs 6,500) and a digital angle finder (Rs 3,500), covered further down.
What pushes a laser level's price up
Three things decide the laser level price in Pakistan more than the logo on the case:
- Self-leveling. A self-leveling unit sets its own lines level within its range, while a manual one depends on you centring a bubble. Together with the green beam, this explains most of the jump from Rs 1,350 to Rs 13,000 in our range.
- Beam colour. Green lasers cost more than red but are far easier to see in daylight and under bright site lights.
- Coverage and accessories. 360° lines, a remote, a wall bracket and a lifting platform all add cost. In our range, that whole package is the Rs 2,000 gap between the 5-line and the 16-line.
5-line vs 16-line: what the extra Rs 2,000 buys
Both Sared models are self-leveling green lasers with two rechargeable lithium-ion batteries and a charger. The difference is coverage and accessories.
| Feature | Sared SR-LL-0501 (5-line) | Sared SR-LL-1601 (16-line 4D) |
|---|---|---|
| Line layout | 4 vertical + 1 horizontal | Two 360° horizontal + two 360° vertical |
| Stated accuracy | ±1mm at 5m | Not stated in the listing |
| Self-leveling range | ±3°, flashes an alarm if out of range | ±3°, audible alarm |
| Remote control | Not listed | Included |
| Mounting | 360° fine-tuning rotary base | Wall bracket and lifting platform |
| In the box | 2 batteries, charger, carrying case, laser glasses | 2 batteries, charger, remote, padded case |
| Price | Rs 13,000 | Rs 15,000 |
The Sared SR-LL-1601 16-line wraps lines around the entire room. From one position you get a level line on all four walls plus vertical references, so a bathroom, kitchen or false ceiling can be marked without moving the tool. The remote lets you change lines and modes from across the room, and the wall bracket and lifting platform let you mount the unit and fine-tune the line height.
The Sared SR-LL-0501 5-line is the one with a published accuracy figure (±1mm over 5m) and a rotary base for aiming lines precisely. It suits work done one wall at a time: switchboards, a single tiled wall, shelving, door and window frames. Its listing does not describe the horizontal line as 360°, so for full-room work expect to reposition it.
Who should not buy the 16-line? If you mostly mark single walls, fix switchboards or hang cabinets, the 360° coverage sits unused and the 5-line's stated accuracy and rotary base are more useful. Who should not buy the 5-line? Anyone tiling or ceiling whole rooms every week, because repositioning the laser for each wall costs time and adds room for error.
Shop · green laser level
Sared
Sared SR-LL-0501 5-Line Self-Leveling Green Laser Level - Professional 360° Rotary Leveling Kit
Sared
Sared SR-LL-1601 16-Line 4D Green Beam Laser Level - Professional Self-Leveling Tool with Remote Control
Green beam vs red beam
Sared says its green beam is up to four times brighter than a standard red beam, and that is the main reason to pay for green: you can see the line in a well-lit room or under site lighting. Red lasers are cheaper and work fine in dim interiors over short distances.
Green lasers generally use more battery than red ones, so the two-battery kits are useful. Keep one charging while you work, which also helps during load shedding.
Laser level for tiles, ceilings and electrical work
A self-leveling laser earns its price on jobs where every row has to match:
- Wall tiles: Floors in Pakistani houses are rarely perfectly level. Project a horizontal line and set your first full row from it instead of from the floor, then cut the bottom row to fit.
- Floor tiles: The two 360° vertical lines of the 16-line also run across the floor, giving you crossing reference lines to start the layout from instead of chalk lines.
- False ceilings and gypsum work: A 360° horizontal line around the room marks the channel height on every wall in one go.
- Electricians: Mark switchboard heights and conduit runs before plaster, so every board in a room lines up.
- Plumbers: Set mixer and basin heights consistently across a bathroom.
For drain pipes that need a slope, a laser line alone is not enough; a digital angle finder reads the slope in percent. If you are fitting tiles, our tile installation tools guide covers the rest of the kit, including the Sared SR-CT-135 tiling machine.
Self-leveling and accuracy explained
Self-leveling within ±3° means the laser corrects itself as long as the surface it sits on is within 3° of level. Beyond that, both Sared models warn you instead of projecting a misleading line. On a rough slab, find a flatter spot, use the lifting platform or a tripod, or wedge the base until the warning stops.
±1mm at 5m (stated for the 5-line) means the line may sit up to about 1mm off true over a 5-metre wall. That is tight enough for tiling and cabinet work.
Budget option: the Rs 1,350 4-in-1 laser level
The 4-in-1 Multipurpose Laser Level pro 3 combines a red laser (horizontal, vertical or cross), an 8-foot tape, three bubble vials (0°, 90° and 45°) and a 6-inch ruler, running on three AG13 button cells.
It is good for hanging frames, curtain rods and floating shelves at home. It is not a tiling tool: it does not self-level, so accuracy depends on how carefully you centre the bubble, and a red beam fades quickly in bright rooms. Masons and tile fixers should skip it.
Companion tools: distance meter and angle finder
The DINGQI 40M laser distance meter measures from 0.05m to 40m with ±2mm accuracy and calculates area and volume, which speeds up tile, paint and AC-sizing estimates. It works alone, with no second person holding the tape end.
The digital angle finder reads angles to ±0.1° and slope in percent, has a magnetic base for steel and pipes, two red side lasers, and charges over Type-C. Plumbers use the percent mode to check drain slope, and fabricators use it to set grills and staircase railings at matching angles.
Shop · digital laser
Pakistan-specific care: dust, heat and load shedding
- Cement dust and marble slurry: Wipe the laser windows with a soft dry cloth and keep the unit in its case between jobs. A dusty window gives a fuzzy line.
- Heat: Do not leave the laser or its batteries on a rooftop or in a parked car in summer; our battery care guide explains why heat shortens lithium-ion life.
- Load shedding: Charge both batteries whenever power is on.
- Transport: Switch off before moving and carry it in its case. The self-leveling mechanism is the delicate part.
- Eye safety: Never look into the beam or point it at people's faces. The laser glasses in the 5-line kit help you see the line, not protect your eyes from it.
Common mistakes
- Buying a red-beam laser for daytime tiling, then struggling to see the line.
- Setting the laser on rubble beyond its ±3° range and ignoring the warning.
- Moving a 5-line around a room for every wall, which can leave small steps where tile rows meet at corners.
- Skipping the calibration check after a drop.
Which laser level should you buy?
- Tile fixers, false-ceiling contractors and interior fit-out teams: the Sared SR-LL-1601 16-line at Rs 15,000. Full-room coverage and a remote pay for themselves on the first bathroom.
- Electricians, plumbers and carpenters working one wall at a time: the Sared SR-LL-0501 5-line at Rs 13,000, with a stated ±1mm at 5m.
- Homeowners with occasional jobs: the 4-in-1 Laser Level pro 3 at Rs 1,350.
Both Sared lasers are genuine Sared stock, delivered nationwide with cash on delivery. Weighing Sared against other brands? Read our Dartek vs Sared vs Zain Max comparison, or browse every model on the laser level page.
